Trim-Slice Firmware Updater

From Trim-Slice Wiki

Jump to: navigation, search

Contents

Overview

This page provides reference to all supported Firmware Updaters for Trim-Slice.

Firmware Updater

U-Boot for CompuLab software packages

v2010.09-1.03

Change Log

Release date: 27-Nov-2011 Changes since 1.02:

  • Fixed some SSD/hardisk detection issues on boot
  • Added new usb2sata command to get more control of storage behavior

v2010.09-1.02

Change Log

Release date: 16-Aug-2011 Changes since 1.01:

  • Added automatic reset sequence to the usb2sata interface on boot

v2010.09-1.01

Change Log

Release date: 14-Jul-2011

  • First stable release of the firmware for Trim-Slice

U-Boot with DTS support

Admolition warning.png This Firmware Updater installs U-Boot with DTS support that will work only with mainline kernel 3.5 and above
Admolition note.png

U-Boot environment variable

Trim-Slice requires:

  • the “fdt_hight” value to be set to 0x2C000000 in order to prevent a kernel panic caused by the “__unflatten_device_tree”
  • the “initrd_hight” value to be set to 0x2C000000 in order to prevent a kernel panic caused by the “unpack_to_rootfs”

While in U-Boot issue these commands: 

setenv fdt_high 0x2C000000
setenv initrd_high 0x2C000000
saveenv
reset

v2012.04-1.02

Change Log

Release date: 11-Feb-2013

  • fixed the half memory size issue

v2012.04-1.01

Change Log

Release date: 15-Aug-2012

  • migration to mainline U-Boot v2012.04 with DTS for Trim-Slice
  • added support for PCI and RTL8169
  • added support for USB port 1 and SSD
  • added support for Trim-Slice boot sequence (boot.scr)
Retrieved from "http://www.trimslice.com/wiki/index.php/Trim-Slice_Firmware_Updater"
Personal tools